House rewiring in Clifton
Full and partial rewires, planned room by room so you can stay in the house while the work happens.

A Clifton rewire is a routes problem before it is a wiring problem. Lath-and-plaster walls and original cornices rule out casual chasing, so we survey for riser cupboards, floor voids, and the deep skirtings these houses generously provide, and we agree every route in writing where interiors are listed. Whole-house rewires here often coincide with flat renovations, which is the right moment: floors are up, consent is arranged once, and the making-good is part of a decorating scheme rather than a scar on original plaster. Two Clifton specifics come up on almost every rewire: ceiling heights that make scaffold towers a fixture of the job, and the question of what to do with redundant gas-lamp piping and Victorian bell-wire runs that previous decades left in the voids. We strip the archaeology out where it shares routes with new cable, and label what remains so the next trade knows history from live.
The houses we see in Clifton
Georgian and early-Victorian terraces, four and five storeys, most long since converted into flats with a mix of private owners, lettings and share-of-freehold arrangements. Ceilings are high, walls are lath-and-plaster over rubble-filled masonry, floors hide generations of services, and many interiors carry listed status or conservation-area constraints. Purpose-built mansion flats and a scattering of modern infill complete the picture.
Working in Clifton: the practical bit
Three things shape every Clifton job. Cable routes: lath-and-plaster and listed cornicing punish careless chasing, so we plan routes at survey and use existing risers and voids wherever the building offers them. Consent: flats mean freeholders and management companies, and listed interiors mean listed building consent for anything that touches historic fabric. Supplies: converted buildings often carry aged communal intakes and lateral mains, worth checking before promising an EV charger or a big new load.
We cover all of Clifton Village, Clifton Wood, Hotwells, the crescents, Whiteladies Road (west side), Christmas Steps fringe and the streets between.
What rewiring involves
A full house rewire in Bristol costs £4,500–£8,000 excluding VAT for a typical three-bed and takes five to ten days. That covers stripping out the old wiring, new cabling to every point, a new consumer unit, sockets and switches throughout, and certification. Bristol's Victorian terraces and 1930s semis are the classic candidates: if your wiring predates the 1980s, has old colours, or shows rubber or fabric insulation anywhere, a rewire conversation is due.
This is for you if
- The house still has old colour wiring (red and black, pre-2006) and original sockets
- An EICR or survey has coded the installation C2 or worse
- Rubber or fabric-insulated cable is visible anywhere
- Sockets are scarce, extension leads are everywhere and nothing has RCD protection
- You are renovating anyway and the walls will be open
- Lights dim when the kettle goes on, or fittings buzz and run warm
What's included
- A room-by-room survey and a written scope: every point, every circuit, agreed before work starts
- New cabling throughout, designed to current BS 7671 circuit standards
- A new metal consumer unit with RCBO and surge protection
- Sockets, switches and light points where modern life actually needs them
- Chases made good to a plaster-ready finish, floors relaid, dust managed room by room
- Full testing, Part P notification and the Electrical Installation Certificate
The standard we work to
Rewiring is notifiable under Part P; cabling, circuit design and RCD protection to BS 7671; chases and penetrations made good to a plaster-ready standard.
The full write-up, costs, timings and the questions people ask, is on our house rewiring page. Prices and standards are the same in every part of Bristol we cover.
| Guide range | £4,500 – £8,000+ |
| Typical duration | 5–10 days |
| Compliance | Rewiring is notifiable under Part P |
Guide ranges for budgeting, excluding VAT. We confirm a fixed price in writing before any work starts; the price we agree is the price you pay.
Rewiring in Clifton
Two quick steps. We know these houses.
No account, no obligation. We only use this to prepare your quote.
Rewiring in neighbouring areas
Rewiring in Clifton?
Guide range £4,500 – £8,000+ excluding VAT, typically 5–10 days. Fixed written quote through the form.

